Pocket Filter

 Non Woven Filter Bags

 Fiber Glass Pleated Panel Filter

Application: Pre filter for comfort air conditioning applications.

Type: Coarse dust panel filter.

Frame: Standard galvanized mild steel, stainless steel or aluminum

Media: Glass fibre.

Gravimetric efficiency: 75% – 85%.

Eurovent 4/5 efficiency: EU2, EU3.

Temperature: 120°C maximum in continuous service.

 Dust Collector Filter Bags

We fabricate high quality dust collector convectional filter bagsthat are made from superior quality raw material such as base fiber. These dust collector filter bags are precisely fabricated under the strict quality control inspections right from the stage of procurement of raw material to the finished product. The dust collector filter bags are stitched according to clients’ requirement with the state-of-the-art stitching machines. These conventional dust filter bags are widely used in various industries including cement, steel, incinerators, boilers, power stations, salt processing, ceramic and many others. Further, these offer an entire range of media as follows:

• Polyester
• Polypropylene
• Acrylic (Homopolyrner)
• PPS (Ryton)

 Filter Bag

 Shaker Filter Bag

 Acrylic Needle Filter Bag

Our company is prominent in providing a wide range of Acrylic Filter Media to the valuable patrons. Our Acrylic Filter Bag is manufactured by making use of the optimum quality raw material. Normally in filtration acrylic refers to homo polymer acrylic which is essentially made from 100% of acrylic nitrite. Occasionally less expensive lower performance co polymer acrylics are used.

 Pulse Jet Filter bag

Manufacturer of Pulse Jet Filter bag. As far as The Pulse Jet Filter bag Concern it consists of filter cylinders(bags) enclosed in a metal housing. In operation, dust-laden air enters through the center of bag filter. Either pressure or suction delivers the dirty air to the hopper. The fine practices travel upward and collect on the filter bags. The clean air passes through the bag and is vented to the atmosphere. A high pressure jet of compressed air directed through the bag at timed intervals removes the dust, which is deposited in the hopper and is easily collected for disposal or recovered for use.

Pulse Jet Filter bag : The dust-tight Pulse Jet Filter bag has three section: a plenum at the top, a collector housing in the center and a hopper at the bottom. A plenum houses the blow tubes and supports for the solenoid valves. Clean air or gas is discharged through the exhaust outlet in the plenum. The housing contains the filter bag assemblies. Below the housing is the hopper which contains the inlet. A diffuser in the hopper, adjacent to the inlet absorbs the impact of the high velocity dust particles and properly distributes the incoming air. Pressure drop, which measures collector performance, is indicated by a D. P. Gauge connected at one end to the filter bag section and to the clean air plenum at the other end. A Gujtex rotary airlock is recommended as a discharge valve to handle the collected dust.

 Filter Bag

Our Range of Filter Bag includes PP Filter Bag, FBD Filter Bag, Dust Collection Filter Bag, Antistatic Filter Bag, Woven Filter Bag, Glass Fiber Filter Bag, Pulse Jet Filter Bag, Non Woven Filter Bag, These Filter Bag are known for its optimum quality features. This Filter Bag are manufactured using topmost quality material in accordance to the internationally accepted norms and standards. The offered range of Filter Bags are developed utilizing high grade raw material and innovative technology in strict compliance with the international quality norms and standards. Along with this, the offered range of Filter Bags are available in variegated designs, shapes and sizes in accordance with the diverse requirements of clients

 Leaf Filter

We are the largest manufacturer and supplier of Leaf Filter that are highly efficient, reliable and durable. These Leaf Filters are used for filtration of dust particles and other impurities in various petrochemical and other liquid products manufacturing industries. It is completely automated as it consists of latest technology control system.

Salient features are as follows:

Various joint technologies to prevent particle leakage through the seam

• Reliable sealing devices and reinforcements for constant results
• All designs and measurements can be customized to your individual requirements and we can ensure the 100% reproducibility of any article.

 Multi-Pocket Bag Filters
These filters are manufactured from 100% synthetic filter medium, consisting layers of needle felt and thermally bonded micro fibres. Each Filter consists number of individual dust collecting bags affixed to a corrosion resistantfilter frame.
All media pockets are self supporting to give uniform airflow and total media utilization. These fine filters find extensive applications in ventilation and high dust collecting areas.

 Dust Collector Pleated Cartridge Filter

We offer a number of dust collector pleated standard filters that are available in three different diameters such as 150mm, 225mm and 325mm. These flanges are made from aluminium / stainless steel and its base and interior baskets are from 1.2mm galvanized steel.

 Dust Collector Pleated Bag Filters

We fabricate specifically designed dust collector – pleated bag filters that can be retrofitted into existing bag collectors which result in increasing air volume passing though each bag. These pleated bag filters have PU flanges at the top and bottom and has integrated inner core made of PP. These filters have a number of salient features including:
Easy installation

• Easy removable parts
• Low consumption of air
• Filter area 2-4 times larger than that of traditional bags
• Synthetic parts which make these resistant to abrasion
• Reduced downtime
• Low maintenance cost

 Pleated Bag Filters

We are successfully ranked amongst the top manufacturers and suppliers of a qualitative range of Pleated Bag Filters. Fabricated using optimum quality factor inputs and sophisticated technology, they are designed in compliance with the international standards. These filters are widely praised among our valuable clients for their easy installation, leak proof nature and high durability. Apart from this, they are stringently tested on various parameters of quality in order to deliver flawless range at clients’ end.

Description:

• Pleated Filter Bag features a unique filter design that can be retrofitted into the existing bag collector thus increasing the volume of air passing through each bag
• The increased air capacity of the filter is due to a greater surface area
• The Pleated Bag features a PU flange at the top & bottom and has an integrated inner core made of metal
• All the filter mediums used in the pleated bag are of polyester
• The installation procedure is simple and the part is made of Synthetic material which prevents damages that may occur when other components are utilized

Pleated bag filter have the following:

• Easy to install
• Easy to remove
• Leakage prevented
• Stable and cannot break or fall through the sheet
• The filter area is 2-4 times larger than that of traditional bags
• These bags can withstand temperature up to 130 deg. Centigrade
• High air to cloth ratio and a high dust load capacity
• Open pleat spacing
• Low consumption of air during cleaning process
• High efficiency due to surface filtration

 Pad Holding Frame Filters

Application: Pre filtration in air conditioning or industrial processing systems.

Type: Coarse grade filter.

Frame: Standard galvanized mild steel, stainless steel or aluminum

Media: Synthetic / glass fibre.

Arrestance efficiency: 65% – 90%.

Eurovent 4/5 efficiency: EU2 – EU4.

Temperature: 80°C maximum in continuous service.

Humidity: 100% RH.

 Floor Filter

This is made of glass fibre fleece and is used effectively to arrest the paint mist in a spray booth. They are also called as Paint Arrestance Media as they are used on the floor of the small paint booths. They are available in rolls and cut sizes.
•Low initial resistance
•High separation efficiency
•Different color on inlet and outlet side
•Flexible
•Economical and practical
Application:
used in the spray booth or filter mist in kitchen
Type: supply slices or rolls size
Media: fiber glass with gradual density, inlet side is green, outlet side is white
Class: G3, G4
Average arrestance:93%
Average separation efficiency: 95%
Final resistance: (suggest) 130Pa-200Pa
Temp. resistance: 170
Model – PA-220
Thickness – 50 mm
Roll Size – 0.8m x 20m / 1.0m x 20m / 1.2m x 20m / 1.6m x 20m / 2.0m x 20m
Model – PA-260
Thickness – 80 mm
Roll Size – 0.8m x 20m / 1.0m x 20m / 1.2m x 20m / 1.6m x 20m / 2.0m x 20m

 Ceiling Filter
These are ceiling filters for are used for spray booth. Our ceiling air filter are made of progressively structure media made using synthetic thermo bonded fibers – adhesive coated in depth. We also offer sizes which are customized as per specific customer requirements. We are well known ceiling filter media exporter offering them at market leading prices.
Item – Ceiling Filter
Model – CF-560
Thickness – 25 mm
Roll Size Avbl – 0.8m x 22m
1.0m x 20m
1.6m x 22m
2m x 20m
2.1m x 22m